If you have a fire or water emergency, please call us now at (480) 456-0000

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

Should Mold Testing or Sampling Be Performed To Your Property?

10/18/2022 (Permalink)

Mold Testing or Sampling

Is sampling for mold needed? In most cases, if visible mold growth is present, sampling is unnecessary. Since no EPA or other federal limits have been set for mold or mold spores, sampling cannot be used to check a building's compliance with federal mold standards. Surface sampling may be useful to determine if an area has been adequately cleaned or remediated. Sampling for mold should be conducted by professionals who have specific experience in designing mold sampling protocols, sampling methods and interpreting results. Sample analysis should follow analytical methods recommended by the American Industrial Hygiene Association (AIHA), the American Conference of Governmental Industrial Hygienists (ACGIH), or other professional organizations.

Are there federal regulations or standards regarding mold testing?

Standards or Threshold Limit Values (TLVs) for airborne concentrations of mold, or mold spores, have not been set. Currently, there are no EPA regulations or standards for airborne mold contaminants.

Understanding Mold

When water intrudes into your property, mold growth can start in as little as 48 hours. Consider the following mold facts:

  • Mold is present almost everywhere, indoors and outdoors.
  • Mold spores are microscopic, float along in the air, and may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or a pet.
  • Mold spores thrive on moisture. Mold spores can quickly grow into colonies when exposed to water. These colonies may produce allergens and irritants.
  • Before mold remediation can begin, any sources of water or moisture must be addressed. Otherwise, the mold may return.
  • Mold often produces a strong, musty odor, and that odor can lead you to possible mold problem areas.
  • Even higher-than-normal indoor humidity can support mold growth. Keep indoor humidity below 45 percent.

The Mold Remediation Process

Every mold damage scenario is different and requires a unique solution, but the general mold remediation process stays the same. 

  1. Emergency Contact - (480) 456-0000
  2. Inspection and Mold Damage Assessment
  3. Mold Containment
  4. Air Filtration
  5. Removing Mold and Mold-Infested Materials
  6. Cleaning Contents and Belongings

Other News

View Recent Posts